UV Modification Machine

  • This topic is empty.
Viewing 1 post (of 1 total)
  • Author
    Posts
  • #674 Reply
    admin
    Keymaster

      https://www.gdlbtech.com/UV-Modification-Machine.html

      LBUV-906MD double-sided UV machine

      1.Equipment overview

      Mainly used for PCB printing drying or UV use before settling tin.

      2.Equipment specifications and main technical indicators

      Model structure: feed section length 200mm, first UV section 2100mm, discharge section 200mm, total length 2500mm, total width 1200mm.

      UV mode: 6 sets of 9KW lamp, 3 sets up and down each, effective luminous length 750mm, each lamp can be independently controlled.

      Lamp: Imported lamp 9KW UV lamp 6 UV lamps heating time 5min.

      Material: internal and external SS41# steel plate after anti-rust treatment electrostatic spraying 60# light sand color.

      Lamp life: the voltage fluctuation is within 5%, and each lighting is more than 4 hours, and the lamp is guaranteed to be used for more than 1000 hours.

      Reflector: Aluminum alloy reflector with new imported titanium-plated reflective aluminum sheet, high reflection efficiency and light.

      Energy requirements: 800mj/spcm(5m/min).

      Wavelength: 365nm

      Transmission system: motor (made) with gear reducer, sprocket, transmission network transmission, maximum transmission speed 8M/min, VR stepless speed regulation, LED digital speed display.

      Transmission net: adopt stainless steel polishing wheel+UPE wheel transmission.

      Control panel: man-machine +PLC control (detect no product inflow within 3 minutes, light source into standby state). Safety device: leakage circuit breaker, overtemperature prevention, transmission motor overload protection, exhaust motor overload protection, abnormal emergency switch, control line fuse, etc., in line with international safety standards.

      Vivi
      lbt@lbt.tw

    Viewing 1 post (of 1 total)
    Reply To: UV Modification Machine
    Your information: